Detailed Beginner With Onahole Tutorial
First: apply lubricating oil
Most of the famous purchased items come with a small packet of lubricating oil in their packaging. So don't be too surprised if you see a small packet inside the famous device box that obviously feels like shampoo. Tear it off with confidence, yes, this is the lubricating oil specified by the manufacturer. Generally, squeeze out 1/3 of the manufacturer's recommended stick lube at a time, or 3 drops of soybean-sized lube.
Two: cup channel heating
If lubricating oil has been added to the cup channel, the heating rod can be carefully inserted directly into the onahole, otherwise it will not be inserted due to the large resistance.
Remember that the heating time is too long, otherwise the colloid is easy to scald. The recommended time is about 5-10 minutes.
Third, enjoy the cup
Remove the heating rod from the cup, turn off the power and set aside.
You can squeeze two drops of soybean-sized lube onto Ding Ding and spread it evenly on Ding Ding. Pick up the cup and slowly stuff the penis into it.
As the cup moves up and down, enjoy the joy of the cup artifact.
Fourth: cup cleaning
Many people clean the famous paraphernalia by turning the famous paraphernalia upside down to clean. This method is wrong. Turning over and cleaning can easily damage the entrance of the famous paraphernalia. The correct way is to open the entrance slightly, turn on the faucet and let the running water pour in. Pour it into the mold until the water overflows from the mold, allowing the flowing water to automatically rinse out the dirt inside.
You can use shower gel or soap to clean the inside and outside walls
Five: Cup maintenance
1. You can use a dry towel to go deep into the cup to absorb the water, do not wipe with a towel, it is easy to leave scraps of paper to breed bacteria
2. Open a hole in the cup and insert the suction wand slowly. Remember not to force it, because the resistance of the cup channel will be relatively large. After the suction stick is fully inserted into the bottom of the cup, gently squeeze the cup body to allow the cup's curved channel to fully touch the suction stick to achieve the effect of water absorption, and then slowly take it out.
3. After wiping the water off the surface of the cup with a dry towel, lightly apply a layer of maintenance powder, and then tap the body of the cup to evenly distribute the maintenance powder. Remember to wipe the moisture on the surface and apply the care powder, otherwise it will clump. In addition, the care powder can prevent the cup from getting oily.
Most of the famous purchased items come with a small packet of lubricating oil in their packaging. So don't be too surprised if you see a small packet inside the famous device box that obviously feels like shampoo. Tear it off with confidence, yes, this is the lubricating oil specified by the manufacturer. Generally, squeeze out 1/3 of the manufacturer's recommended stick lube at a time, or 3 drops of soybean-sized lube.
Two: cup channel heating
If lubricating oil has been added to the cup channel, the heating rod can be carefully inserted directly into the onahole, otherwise it will not be inserted due to the large resistance.
Remember that the heating time is too long, otherwise the colloid is easy to scald. The recommended time is about 5-10 minutes.
Third, enjoy the cup
Remove the heating rod from the cup, turn off the power and set aside.
You can squeeze two drops of soybean-sized lube onto Ding Ding and spread it evenly on Ding Ding. Pick up the cup and slowly stuff the penis into it.
As the cup moves up and down, enjoy the joy of the cup artifact.
Fourth: cup cleaning
Many people clean the famous paraphernalia by turning the famous paraphernalia upside down to clean. This method is wrong. Turning over and cleaning can easily damage the entrance of the famous paraphernalia. The correct way is to open the entrance slightly, turn on the faucet and let the running water pour in. Pour it into the mold until the water overflows from the mold, allowing the flowing water to automatically rinse out the dirt inside.
You can use shower gel or soap to clean the inside and outside walls
Five: Cup maintenance
1. You can use a dry towel to go deep into the cup to absorb the water, do not wipe with a towel, it is easy to leave scraps of paper to breed bacteria
2. Open a hole in the cup and insert the suction wand slowly. Remember not to force it, because the resistance of the cup channel will be relatively large. After the suction stick is fully inserted into the bottom of the cup, gently squeeze the cup body to allow the cup's curved channel to fully touch the suction stick to achieve the effect of water absorption, and then slowly take it out.
3. After wiping the water off the surface of the cup with a dry towel, lightly apply a layer of maintenance powder, and then tap the body of the cup to evenly distribute the maintenance powder. Remember to wipe the moisture on the surface and apply the care powder, otherwise it will clump. In addition, the care powder can prevent the cup from getting oily.